Kmise bass neck

Kmise bass neck DEFAULT

Top critical review

All critical reviews›

1.0 out of 5 starsOK neck material, but you will need to work on it

Reviewed in the United States on January 10, 2019

Truss rod flops around inside. It also has very little adjustment and cannot counteract the force of the strings enough to produce an action lower than 10/64", which is high, without unplayable buzz. Frets were not finished after they were initially cut. I rolled the edge and filed fret ends fixed it. Nut is a joke, so just order a new one and replace off the bat. Dots on the side of the fretboard are not evenly lined up. Tuning peg bushings fit well. Fit great in the neck pocket, however. Had to sand some glue off the fretboard. Frets do not seat fully in the fretboard slots and require an extreme amount of leveling to be somewhat playable. I had good luck with Mighty Mite necks, but I gambled and lost with this failed experiment. Essentially a P.O.S. and I am throwing this out.

Sours: https://www.amazon.com/Kmise-MI0085-Fender-Bass-JAZZ-Rosewood/product-reviews/B010LF45NG

todgermanica.com

DSC06494
Here’s the finale on my Behringer 4-string bass re-neck and re-string. Here’s the original  Behringer neck.

dsc06361

My music dealer was unclear on the string tree concept. Original unserviceable maple/rosewood neck.

I bought it at Denio’s flea market for $75. Cleaned it up and it sounded nice. But brutal amateur luthier torquing had ruined the neck’s truss rod adjuster.
DSC06506
A new Canadian maple neck with maple fretboard cost me $36, free shipping, from Kmise in China.

DSC06490

Super wide padded Ernie Ball locking strap is comfy and secure.

Delivery took three weeks and condition was smooth, with a near press-fit to the body pocket. Neck installation here.

DSC06438

I first learned on narrow neck Ibanez basses so the Kmise replacement is Jazz bass style with the narrower nut.

I wanted bright roundwound string to complement the bright maple neck and board so I chose regular light D’Addario XL Nickel strings.
DSC06478
I had to just estimate where to drill the string tree hole but it stays in tune despite me cutting the treble strings too short.
DSC06497DSC06498
Setup was easy though I just torqued the neck by guess and by golly, then moved the saddles up or down to stop fret buzz.
DSC06513
Intonation is fun and easy, just shorten or lengthen each string using the small Phillips screw at rear of each saddle if the pitch is flat or sharp at the 12th fret.

After each adjustment, tune the string, then test again at the 12th fret. Continue until intonation is good. It’ll never be perfect so don’t fret.
DSC06515

DSC06506

Best location for output jack.

The XL strings combined with the bright white maple neck and board does indeed produce the ringing, bright, piano-like tone I was looking for.
DSC06504
At this point I play a sort of one-man-band melody lead solo bass, so I wanted a big resounding sound.

I’ll never buy another Behringer bass simply because they made so few of them but it sounds sweet.

I’m very happy with the look and the sound and would buy another Kmise neck. For less than $40 USD it looks and sounds good.
DSC06491

Precision bass style basses have the best pickup location for resonance and this one sure resounds. This brightness will fade in time when the strings wear in but I’m enjoying the tone already.

Unless noted, all text and images produced and copyrighted by todgermanica.com.
Non-commercial, nonpolitical, non-religious, non-ideological use free with attribution.

Like this:

LikeLoading...

Posted in bass guitar, collecting, guitar, music, photography, Uncategorized | Tagged behringer, d'addario, fender, music | | Sours: https://todgermanica.com/2019/03/18/new-kmise-maple-maple-neck-on-an-old-behringer-bass-body/
  1. Hunters boots amazon
  2. Murray self storage
  3. Apc ups alarm

Converter: cm inch

Converter: inch cm

Specification:
Product Name : Guitar Neck For 4 String Bass Guitars Parts Replacement Maple 21 Frets
Style: for Fender JB Bass Parts Replacement
Orientation:Right for Right Handed Players
Finish: Vintage Tint Satin

Installation Size:
Width at Heel :2.52 inch / 64 mm
Depth at Heel : 0.87 inch / 1.08 inch with Fingerboard (22.00mm / 27.50mm(±0.5mm Deviation))
Installation: Bolt On

Neck Size:
Scale Length: 34.64 inch / 880 mm
Number of Frets: 21
Width at Nut : 1.50 inch / 38 mm
Width at 12th Fret: 2.22 inch / 56.5 mm
Depth at 1st Fret: 0.83 inch / 21 mm
Depth at 12th Fret: 0.94 inch / 24 mm
Tuner Hole: 0.71 inch / 18 mm
Truss Rod Type: Double Style ,for 4 mm Allen Wrench
Radius: 16 inch /406 mm
Fret Wire Type : 2.7 mm Medium Jumbo
Mark Dot: 0.24 inch / 6 mm
Side Dot: 2mm White Dot

Material:
Material: Maple Origin from Canada
Fret Wire: Cupronickel
Mark Dot: White Abalone Dot

Features:
Made of Maple Wood Origin From Canada Which is More Sturdy and Resonance and Sustain Well
Smooth Fingerboard Edge, No Hand Scratched
Installed with Double Style Truss Rod for 4 mm Allen Wrench,So You Can Adjust to Loose or Tighten.
High Quality Fingerboard with 21 Cupronickel Fret Wire and White Abalone Mark Dot Inlay

Package Include:
1 x Electric Bass Neck

Note: guitar neck is hand craft and there may some tiny size error
Sours: http://kmise.com/goods-18503.html
Bass Akustik Elektrik Custom

Converter: cm inch

Converter: inch cm

Specification:
Product Name : Guitar Neck For 4 String Bass Guitars Parts Replacement Maple 21 Frets
Style: for Fender JB Bass Parts Replacement
Orientation:Right for Right Handed Players
Finish: Vintage Tint Gloss

Installation Size:
Width at Heel :2.52 inch / 64 mm
Depth at Heel : 0.87 inch / 1.08 inch with Fingerboard (22.00mm / 27.50mm(±0.5mm Deviation))
Installation: Bolt On

Neck Size:
Scale Length: 34 inch / 864 mm
Number of Frets: 21
Width at Nut : 1.50 inch / 38 mm
Width at 12th Fret: 2.22 inch / 56.5 mm
Depth at 1st Fret: 0.79 inch / 20 mm
Depth at 12th Fret: 0.85 inch / 22 mm
Tuner Hole: 0.71 inch / 18 mm
Truss Rod Type: Double Style ,for 4 mm Allen Wrench
Radius: 14.17 inch /360 mm
Fret Wire Type : 2.7 mm Medium Jumbo
Mark Dot: 0.24 inch / 6 mm
Side Dot: 2mm White Dot

Material:
Material: Maple Origin from Canada
Fret Wire: Cupronickel
Mark Dot: White Abalone Dot

Features:
Made of Maple Wood Origin From Canada Which is More Sturdy and Resonance and Sustain Well
Smooth Fingerboard Edge, No Hand Scratched
Installed with Double Style Truss Rod for 4 mm Allen Wrench,So You Can Adjust to Loose or Tighten.
High Quality Fingerboard with 21 Cupronickel Fret Wire and White Abalone Mark Dot Inlay

Package Include:
1 x Electric Bass Neck

Note: guitar neck is hand craft and there may some tiny size error
Sours: http://kmise.com/goods-18507.html

Bass neck kmise

About This Listing

A fantastic tinted maple neck. Plays Great! It's raw or has a very subtle satin finish. It doesn't look very good on a natural body like my old Jazz Bass though (why I took the red J photo over it) It has an overhanging fretboard, and there is some wood filler around one of the holes where the neck would meet the body. Don't worry, this neck won't move! Thanks!

This item is sold As-Described

This item is sold As-Described and cannot be returned unless it arrives in a condition different from how it was described or photographed. Items must be returned in original, as-shipped condition with all original packaging.

Product Specs

Listeda year ago
ConditionVery Good (Used)

Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.learn more

Brand
Model
Categories
;

Oops, looks like you forgot something. Please check the fields highlighted in red.

Sours: https://reverb.com/item/35027797-kmise-maple-jazz-bass-neck
Cool trick to MAKE YOUR BASS NECK 10x FASTER

He continued to masturbate frantically, examining and memorizing every fold of Irina. Her anus as well as her labia and pubis were wildly overgrown with thick black hair. Stop jerking off. Shove my ass.

You will also be interested:

I turned on the stove, and my guest warmed up a little, even though her teeth were no longer chattering. We hardly spoke - I was busy with the car. Having parked the car, I took an umbrella from the back seat and offered the girl to lead her to the entrance. She did not refuse, and we went out under the wet whips of the autumn shower.



1257 1258 1259 1260 1261