Jukebox drawing easy

Jukebox drawing easy DEFAULT

The Jukebox (Commission Art for @seveaux)

Hello whaleshares! Welcome to an another post!

From lil' old me, Maya!

Sorry I didn't post anything for 5 days.. Again.. And didn't draw anything in that 5 days. I know, I can't blame anything but school and exams! I hope all of you readers will understand! It's nice to take a break from art a bit! A fresh start!

Now I really wanted to my make my next post about @steamdan and @seveaux they're the coolest man! I want people to give em' some love for their post and some support. I appreciate everything from both of you. I want to say thankyou for everything.

Like seriously you guys are so nice! I am so thankful that Steamdan introduced me to seveaux. And that lead to these drawings.

I myself now want to try music.. and the beats ofcourse not good as Seveaux's and it sounds so shitty, with my brain saying "I don't know on what I am doing" but hey I am having fun at least. Heheeh.

Anyways that's enough of my TED talk! Let's get onto the artwork for him!

There are 2 pictures I did for him, let's try to do the Jukebox first

insert coin here to start...

{coin inserted..}

I started with an actual sketchbook! I drew a little sketch of how the jukebox would actually look like, besides I didn't know what seveaux actually wanted..

So I just go about it and say to myself, yeah this looks nice!! I actually find it cute though.

It's like a mini version of a jukebox, so I went with it!

I try to pick my color pallete. I thought a rainbow color since most jukebox looked like that, but whenever I tried it out it looks like...


So I settled down with
Brown, yellow, blue, and pink are the main colors of the piece.

Then what I did was.. Well.

I have no clue other than to say I.. "Overpainted" it

Again breathes in

Overpainting in digital: make a new layer above the sketch layer and try to detail the hell out of the drawing. Again this is what I usually do, you can use other technique and it fits the way I draw so.. A little disclaimer around that..

I need to do a detailed tutorial on this.. I am making a skin tone one for a request named yanes94 which I like her art, and I'm trying to make it good, and I don't spread misinformation on drawing, since I am not an actual professional. So just bare with me! 😂

Sorry for the long tanget, anyways getting back on track!

I also changed the "coin" from bitcoin to Airplay coins since I think that's a bit appropriate for this! Invest your airplay to get your music ;)

I use my favourite thing ever in my entire life of existence of digital art:

Blending layers, where I put some shading there.

I used blending layer multiply to make it darker.



I added background, since if it is only with the white background it doesn't seem like it's glowing like I envision it to be. So I need things to contrast with the light blah blah blah.. You get the point.

Now that is the first art.

Let's move on to THE-JUKEBOX one.



After this, mister Seveaux saw that he requested a more of "street arts" style. Which I actually have never done that before, well that's an exaggeration, I only have done it ONCE in that art style and that was when I was.. 13..

I had to google and try to refference "what makes a street art style" and to be honest I have no answer on that.

Whatever it is, it has to be on a wall of a street, and it should be used with a graffiti.

Some of the art I've google is pretty good! I can't post it here because.. Copyright reasons. So check em all out.

What I do find interesting is that they do these little things inside the word, I can't describe it properly with words, so for example in this picture.

This is the word JUKEBOX, and inside those letters there are these patterns, they are completely random honestly. But not too random to the point it looked like a mess, just find the balance and ask yourself "is this enough"?

Assuming that you are on digital and you kind of fucked up well UNDO! (Sorry for the people in traditional)

Now that we clear out what I think the "street-art" style looks like lets get into this.

I try to make the jukebox as the O, but seveaux wanted it to look modern soo, I made it turn into a speaker! And he liked it! Which I am glad! :D

This is all 2d coloring. I don't have anything to explain rather than.. I just make it more glowy? I don't really know what I was doing rather than experiments going on.

I already explained why I use a background from the first jukebox art above so..

This is the final art of it.

Thankyou all so much for reading and thankyou again @seveaux and @steamdan for everything. I already told people this in the previous post for @erodedthoughts.

But I genuinely am thankful, I thought I would have a bad month in november, but you just made it the brightest moments of my life ❤

Thankyou so much. Thankyouu

And you readers too, I hope you enjoyed it, I can't thankyou enough for the people who have supported me from upvoting and I apologize if it seems I didn't notice your help and support for this blog.

Like @[email protected] you've been supporting me from the start. I can't thankyou enough. And @thilah for being a good friend heueheue!

Thankyou all.

See you next time!

Sours: https://whaleshares.io

Archive for category: jukebox

It’s been over a month since Jukebox released and my third pandemic book release. It’s not easy. I miss being on the road and meeting educators, librarians and of course, readers. I appreciate the emails and messages from folks who have read and enjoyed it – it keeps me going in this seemingly never ending pandemic. I’ve been on some amazing panels discussing comics, from the American Library Association panel with Jerry Craft, Varian Johnson and Nadia Shammas, to a Comicon panel with Judd Winick, Dana Simpson, B.C. Peterschmidt, and Jerry Craft. It’s always a joy to share the love of comics.

And on the one month release, I wanted to share some of my favorite interiors from Jukebox. I challenged myself with the research, story, design and of course the colors (aided by my co-colorist Elizabeth Kramer).

The first time Shahi and Naz turn on the Jukebox.

Harlem in the 30s.

Women’s march for Equality in Washington DC in the 70s.

Bud Billiken parade in Chicago in the 60s.

Break dancing in Venice Beach in the 80s.

I have many other favorites but I don’t want to give away any of the ending. You can still find signed copies here.

Now, I’m working on more books – picture books, early readers and another middle grade graphic novel. I am grateful, regularly, that I am able to do this work. And, also it’s hard to keep momentum up without the in person interaction. I long for it to return and will be overjoyed to see folks when it’s safe.

I hope you and yours are finding ways to keep your spirits up.

Thank you, always, for the support.


Sours: https://everydayloveart.com/category/jukebox/
  1. Karambit boot knife
  2. Pool bathrooms designs
  3. Mmc express care
  4. Gta pop smoke

Easy How to Draw Tutorials

Step by Step lessons can help students improve their drawing skills.

As a former classroom art teacher, I spent years watching students go through the process of learning how to draw. In time, I saw how many were often unsure of where to start, and how to keep going when they felt stuck.

Direct draw instructions on the front board did work for a little while. It had its limitations though, with larger (and noisier!) classes.

Then there was the issue of pacing. Some students always wanted to go faster, and some a bit slower. It kept the whole process feeling a bit chaotic, both for myself and for them too.

The solution? Create my own simple handouts, that students could easily follow on their own.

No screen needed, no internet connection. Just a printed piece of paper so they could work completely on their own. It worked so well that I started making more and have never stopped.

Many websites that share drawing tutorials for kids are either overly simplistic or overly complex. My tutorials are made for students that want to learn how to make things look a bit more realistic, without getting overwhelmed by details. Step by step tutorials are a great way to help students build their confidence, and hopefully start on a lifetime love of drawing.

My collection of tutorials include:

• How to Draw Animals

• Cartoon Drawing

• How to Draw Plants

• Seasonal & Holiday Drawing Ideas

New drawing projects are added often, so stop by to see the latest one. It just might be the perfect lesson for your classroom today!

Sours: https://artprojectsforkids.org/category/view-by-theme/drawing-tutorials/
How To Draw A Funny Juice Box

Introduction: Jukebox

On discovering Volumio (Open Audiophile Music Player) I thought that it could be used to build a great Jukebox; and the rest is history.

The following instructable is more of a generally overview on how I built this project. As such some of the smaller, more obvious steps may have been skipped.

Initial project scope

  1. Be able to play local and streamed music.
  2. Touch screen and button controlled
  3. Colour changing LED tube
  4. Karaoke module
  5. Quality sound

What as not achieved

  1. Touch screen: While the display used is a touch screen I could not get it to work with Volumio. I am sure that this can be fixed but alas my knowledge of compiling Linux drivers is not good. If anyone is able to help me with this it would be appreciated but for now I will leave this until another time. As a work around, when necessary I connected via a wireless keyboard or mouse, or via a remote computer (as Volumio allows you to browser to the interface from anywhere).
  2. Karaoke module: I could not get the unit that I purchased from AliExpress to work but as the module would simply plug into the Jukebox amp, this will be easy to add in the future.

Materials used

  • 10mm plywood
  • 4mm plywood
  • 4mm masonite
  • 10mm Acrylic
  • 20mm MDF
  • 2mm acrylic
  • Wood glue
  • Acrylic cement
  • Spray paint
  • Opaque/frosting glass spray paint
  • Arduino mini
  • Raspberry PI 3
  • 70W, 5V, 14A PSU
  • PIFI Digi DAC+ HIFI DAC Audio Sound Card Module
  • Raspberry PI 3 GPIO extension board
  • ODROID-VU7 Plus
  • LED Strip (5V, WS2811)
  • HDMI ribbon cable (90 degree)
  • Chrome Plating 30mm LED Illuminated Push Buttons
  • Stereo amplified (2nd hand, purchased from an online auction)
  • Boxed speakers (2nd hand, purchased from an online auction)
  • 2.5M hex standoffs
  • Double-sided tape
  • Miscellaneous: wire, solder, heat shrink tubing, screws, electrical junction box, crimps etc.
  • Black vinyl


Main Tools Used

  • Soldering Iron
  • Vinyl cutter
  • Laser Cutter
  • CNC Machine
  • Router
  • Table saw
  • Jigsaw
  • Screw driver
  • Glue gun

Step 1: Overall Design

The box was designed to be the same some as some historic models i.e. approximately 85x155cm.

The four areas on the front are:

  • The neon tube (yellow)
  • The speaker grid (gray and brown)
  • The jukebox interface (Pink and white; Jukebox Jam)
  • The semi-circle insert (pink, black and white with musical notes)

Initially I was going to put the speakers

  1. Behind the speaker grill
  2. Where the black circles are in the semi-circle insert

But my speakers were too large and I felt that trying to squash them all behind those locations would impact on the quality of the sound. In the end I decided that the speaker grill and semi-circle insert would simply be ornamental and that the speakers would be left in their speaker boxes, positioned so as to face out of the left and right hand sides of the jukebox. This also meant that if desired the speakers could be moved to be placed anywhere in the room.

Step 2: Neon Tube

This above CAD drawing shows how I cut the pieces that I used to create the front neon tube. This was determined by the size of my laser cutter and material availability. Using 10mm acrylic I exported the DXF file to an SVG and cut pieces using a CO2 laser cutter. Using acrylic cement I then stuck them together to form the tube as show in the above images.

Using 180 grit sandpaper on a random orbital, or delta sander, sand the outside of the neon tube. Then apply the frosting spray paint to it.

In hindsight it would have been better to sandblast the tube or to use opaque acrylic.

Step 3: Semi-cirlce Insert

Using 4mm plywood cutout "JukeBox-Top-Insert.svg" on the CO2 laser-cutter, where necessary etching lines (black) so that it will be easier to paint and line things up later.

  • The semi-circle was painted pink
  • The larger disks were painted white
  • The smaller disks were painted black

The smaller black disks were glued onto the white disks and the white disks are then stuck onto the back of the pink semi-circle so that the black and white showed through (see above images).

"JukeBox-Music.svg" was cut out using a vinyl cutter and then stuck onto the pink semi-circle as above.

Step 4: Cutting the Speaker Grill

Using Blender, exported "Disc.blend" to an STL file. Using a CNC machines, cut the disc into a 20mm piece of MDF. The height of the STL file was adjusted so as to accommodate the thickness of the MDF.

Opening "Jukbox4.svg" and hiding all layers except for "Grill", cut the grill out of 4mm plywood using the laser-cutter.

Using wood glue, I stuck the disc onto the disk part of the grill, trying to line things up so the one of the star points is at the 12 o'clock position. Once the glue was dry, I spray painted the grill with silver/galvanizing paint.

Step 5: Prepaing the Grill Material

I made a wooden frame (bigger than that of the grill), pulling the hessian tightly over the frame and stapling it in place. applying glue (I used PVA wood glue but other types might be better). Once dry you will have a smooth but firm sheet sheet of hessian. Applying wood glue to the underside of the Grill, I stuck it down onto the hessian so that the non-glued side of the hessian showed through; applying a weight to the Grill until it all dried.

Step 6: Buttons

Using a vinyl cutter I cut "Buttons3.svg" out of black vinyl.

Then decided which buttons were needed and where they were to go.

Attached the desired symbol to the appropriate button.

Symbols are

  • Up/Down Volume
  • Next/Previous Track
  • Pause/Play
  • Power On/Off
  • Change lights (this symbol was not used in this build)

Step 7: Jukebox Interface - Part 1

The font that I used was Broadway (see attached). You will need to have it installed if you use "Jukebox-Faceplate-1b.svg".

Hiding all layers in "Jukebox-Faceplate-1b.svg" except for:

  • Buttons
  • Text
  • Screen-cutout
  • Shape

I laser cut the the resulting shape on 4mm plywood.

Thin hiding all layers except for:

  • Screen - Visible
  • Screen - Cover

I laser cut the resulting shape on 4mm plywood. This piece I called the screen cover.

Please note that the above were designed with the ODROID-VU7 Plus screen in mind and will need to be modified if you are using a different screen.

Holding the screen in place, I positioned the screen cover on the face-plate so that the screen was properly covered and would display correctly once in use. Once the position was sorted, I glued and clamed them together. Once the glue had dried I noticed that I did not have the positioning 100% correct. This resulted in my needing to chisel/router some of the face-plate behind the screen cover so that I could realign the screen more precisely.

The entire face-plate was then spray painted pink.

I export the "JukeBoxTextBacking.dxf" to an SVG and cut it out of 4mm plywood. After spray painting this I stuck it to the back of the face plate so that the white showed through the text.

Strips of wood were then stuck onto the back, proving mounting points one which to screw the mounting board.

Step 8: Jukebox Interface - Part 2

Now I installed the buttons in the six holes, bolting them in.

Exported "Mounting Board.dxf" to and SVG and cut the mounting board out of 2mm acrylic. Using the brass standoffs, I assembled the screen and Raspberry PI as in the photograph (screen on one side and the Raspberry PI and other electronics on the other side).

The square hole meant for the 90 HDMI ribbon cable turned out to be too narrow and so the needs to be be made wider (the drawings still needs to be changed to reflect this).

Step 9: The Actual Box

Except for the round part which was done using 4mm masonite and the supporting corner blocks (15x25mm) the rest of the box was built using 10mm plywood. Overall dimensions were approximately 85x155x50xm. "Jukebox4.svg" gives the exact front dimensions used.

The top was created by first using a clamp to check that we could successfully bend the masonite sheet. We then glued and stapled it down on the top and slowly worked down the sides. We placed cover-strips over the ends to neaten it up as well as hold it down. From the photos you will see how we added extra arcs in order to proved a wider surface that we could glue and staple into.

The side sections were cutout so as the accommodate the speakers that I had purchased. A shelf was installed in the top section to hold the amplifier. Finally the back was left more or less open to provide access to the amplifier and other bits and pieces.

The base was made out of two sheets of 10mm plywood; One slightly larger than the next.

All edges where routed round.

I leave the photographs to provide the rest of the missing details.

Once assembled, the who lot was spray painted blue. In hindsite I should have spray painted the insides black as this would have made the project look more finished off. This said no one really sees the inside.

Lastly I screwed the semi-cirle insert and Jukebox faceplates in place and glued the grill in place.

Step 10: Installing and Configuring Volumio

Plugged the HDMI and USB from the the screen into the Raspberry PI and powered it all up.

Following the instruction at https://volumio.org/get-started/ I installed Volumio on your Raspberry PI.

During the setup process I chose Hifiberry DAC Plus for the I2S.

Once installed, I browsed again to my instance of Volumio (http://volumio.local), go to settings, plugins and installed the following:

  • Spotify
  • YouTube for Volumio
  • TuneIn Radio
  • Touch Display
  • Backup & Restore Data
  • GPIO Buttons Controller

While I did not use it, the miniDLNA plugin looks like another one worth installing. You can also install any other plugins that you might want. I found that installing the graphics equaliser resulted in my sound not working.

Once installed I configured each pluggin, setting the GPIOs as follows:

  • Enable Play/pause: GPIO Pin 13
  • Enable Vol+: GPIO Pin 16
  • Enable Vol-: GPIO Pin 23
  • Enable Previous: GPIO Pin 22
  • Enable Next: GPIO Pin 27
  • Enable Shutdown: GPIO Pin 12

To get the screen to display properly I ssh'd to volumio.local and added the below to boot/userconfig.txt:

  • #Set output to DVI so the sound won't be sent through the HDMI cable
  • hdmi_drive=1
  • #Set HDMI group to 2, no idea what it actually does
  • hdmi_group=2
  • #Set hdmi_mode to 87 which seems to be custom resolution
  • hdmi_mode=87
  • #Set the screen parameters
  • hdmi_cvt=1024 600 60 3 0 0 0

Screensaver settings can be set via the Touch Screen plugin in settings.


The following feedback was provided to be by GVOLT on the Volumio community forum. Once I have had a chance to apply this approach, I will update the above.

One hint regarding the modifications of /boot/config.txt: The hdmi* related changes could be placed in /boot/userconfig.txt instead. Using userconfig.txt has the advantage that this file remains untouched when Volumio gets updated. In contrast the /boot/config.txt file gets overwritten on each Volumio update (further information) and you would have to edit /boot/config.txt again.


Step 11: Connecting the LEDs

Upload the "Rainbow.ino" to the Arduino mini.

Positioning the neon tube where I wanted it to go, I traced around the outside. I then attach the LED strip along the middle line of the strip. It didn't lie perfectly flat on the rounded section but that did not matter.

The LED strip has three tracks i.e. +5V, Data, Ground (Red, Green, White; in my case). In order to keep the LED's illuminated evenly, power was connected to the tracks at the top of the semi-circle arch. This necessitated me drilling two small holes through the face just above and just below where the LED strip will run to which I soldered the power leads that were connected to the power supply.

Since LEDs can only work in one direction it is import which side of the strip you connect the data pin to. If you get this the wrong way round it will not work. At the correct end, drill a small hole that will allow you to solder a lead into the data track. This lead will connect to pin 12 on the arduino.

Step 12: Final Connections

The powersupply was used to drive the LEDs, Raspberry Pi (pins 1 (5V) and 6 (Ground)) and Arduino (Vin and Ground). An acrylic cover was placed over the the power supply terminals to protect users from accidentally touch them.

Buttons were connected following this guide i.e. one pin to the relavent GPIO pin (discussed earlier) and the other to ground. The LEDs on the buttons were wired in parallel directly into the power supply.

Loose cables were nailed into place or glued down using aglue-gun.

The amplifier was connected to the PIFI Digi DAC+ HIFI DAC Audio Sound Card Module and the speakers connected to the ampliier.

Finally a power bar was installed that would be used to powe up the entire box i.e. the amplifier, 70W, 5V, 14A power supply unit and any other accessories that I might install in the future.

Step 13: What Would I Do Differently?

While the screen that I purchased came recommended by the Volumio community I would probably use the Raspberry PI screen next time as the touch option should work out of the box.

As already mentioned, for the neon tube I would try sandblasting (this however would need to be varnished so as to keep it clean) or opaque acrylic.

I would also add a button to control the LED lighting a little (see attached Rainbow2 code; modifed by a friend of mine) or wire it into a controller that syncs the lights to the music being played.

My biggest change would be with how I mounted the electronics. I would create a shallow draw underneath the amplifier shelf that would slide out and hold all of the electronics and power supply. Besides making everything much neater it would also make things more robust and safe. A neatly bundled cable track would then run from the draw to the screen and buttons.

Be the First to Share

Did you make this project? Share it with us!


  • Organization Contest

    Organization Contest
  • Unusual Uses Contest

    Unusual Uses Contest
  • 3D Printed Student Design Challenge

    3D Printed Student Design Challenge
Sours: https://www.instructables.com/Jukebox/

Easy jukebox drawing

All Over Albany

Drawing: Postmodern Jukebox at Troy Music Hall

Postmodern Jukebox

Drawing's closed!

The pop song cover/re-interpretation act Postmodern Jukebox will be at the Troy Savings Bank Music Hall this Saturday, October 25. The group takes modern pop hits and reinterprets them in other styles, often from previous eras. A few examples: a ragtime version of "Call Me Maybe" and and 1920s jazz take on Iggy Azalea's "Fancy."

We have a pair of tickets to the show and we're giving them away. To you? Maybe!

To enter the drawing, please answer this question in the comments:

What's something in the Capital Region that you'd like to see reinterpreted?

This could be anything. Non-redeemable bonus points for creativity.

the show at the Troy Music Hall starts at 8 pm Saturday. Tickets are $29.

Important: All comments must be submitted by 5 pm on Wednesday, October 22, 2014 to be entered in the drawing. You must answer the question to be part of the drawing. (Normal commenting guidelines apply.) One entry per person, please. You must enter a valid email address (that you check regularly) with your comment. The winner will be notified via email by midnight that day and must respond by noon on Thursday, October 23.

Troy Music Hall advertises on AOA.

Sours: http://alloveralbany.com/archive/2014/10/21/drawing-postmodern-jukebox-at-troy-music-hall
How to draw Bart Simpson - Bart Simpson Easy Draw Tutorial


Ben Thornewill (pianos, vocals)

Tommy Siegel (guitar, vocals)

Jesse Kristin (drums, vocals)




Jukebox the Ghost's latest record, Off To The Races is a giddy, vibrant collection of Jukebox the Ghost's most bombastic, colorful songs to date. Though it's the fifth studio outing from this long-running trio of piano pop wizards, it plays like an energetic debut album: Just as eager to please as it is eager to surprise you. Every generation has a band that puts a fresh twist on piano-rock, and Jukebox the Ghost’s latest studio offering serves as a memorably vivid and kaleidoscopic step forward for the genre.

 From the opening vocal stack of "Jumpstarted," it's obvious that Jukebox the Ghost has newfound confidence in embracing bold musical risks. A mishmash of modern pop, retro vocals and classic rock indulgence, it's a head-spinning listen for the first go-round that the band describes as "what it's like to be inside of Ben (Thornewill, lead singer/pianist)'s brain." A thickly-layered vocal intro builds into a showcase of Thornewill’s virtuosic classical piano chops and then abruptly vaults into a bouncy, upbeat pop chorus led by Jesse Kristin’s punchy backbeat drumming. A synth solo enters and you're suddenly in a section vaguely resembling hip-hop. The guitar solo kicks the door down and you're front row at an arena rock show. Thornewill recorded over 170 vocal tracks in "Jumpstarted," and somehow you can hear them all.

 One influence stands out in particular as a common thread: Queen. This isn't a matter of happenstance -- The band has recently made a tradition of "HalloQueen," a yearly show where they perform two sets: One as themselves, followed by a set break, and one in costume (and in character) as Queen. Through being forced to do a deep dive into Queen's catalogue, the band says they ended up discovering themselves in the process. "Something magical about Queen to me is that their songs are so catchy, but the song structures are so wonderfully wrong and they're so unafraid to showcase their chops," said Tommy Siegel. "Their music is a reminder to me that pop music doesn't have to come in a neat, restrained package,” added Thornewill, “It's ok to get weird and own it -- And you can still be catchy.” 

The second track from Off To The Races, "Everybody's Lonely" provides a mix of old and new, evocative of Queen crossed with Walk the Moon. In addition to a distinctly modern pop chorus, it also features a surprising time signature shift and a bridge that has more in common with "Bohemian Rhapsody" than it does current radio morés. And though Thornewill’s lyrics thumb their nose at modern pop radio, it’s also easy to envision it becoming a modern pop hit in its own right. The third track, a snarky ode to the 9-to-5 from guitarist/singer Tommy Siegel called "People Go Home" sounds like you've tuned into some 1970s AM radio station that's been humming along in a parallel universe for decades, an otherworldly early-Beatles-style track for the new millennium. The remainder of the record serves as a bright, exciting showcase of the band’s well-honed sense of pop craft, coated in thick harmony stacks that serve as a brand new instrument for the band, dramatic cinematic climaxes, and broad hooks that playfully nod to the past with a decisively modern sensibility.

Off To The Races is their fifth studio outing, mostly recorded at Studio G in Brooklyn and engineered, produced and mixed by Chris Cubeta and Gary Atturio (two exceptions: “Everybody’s Lonely” was produced by CJ Baran and Peter Thomas and “Fred Astaire” was produced by Chris Wallace). Longtime fans will hear little bits of past Jukebox the Ghost embedded in the record blanketed in a fresh, more colorful sonic palette. The flamboyance and quirkiness of Let Live and Let Ghosts (2008), the retro sensibility of Everything Under the Sun (2010), the concise modern pop smarts of their recent self-titled album (2014) and Safe Travels (2012) and the raw live energy of their live album Long Way Home (2016) are all on full display if you listen closely. 

The album is the result of a three-year songwriting and recording process, culled from dozens of demos that the band brought to the table. Recording in their home base of Brooklyn enabled them to do more outside-the-computer sonic experimentation and live performance than past records have afforded. “In ‘Boring’ we sent Tommy’s backing harmonies through a distorting rotary speaker which created this totally weird underwater sound,” explained Jesse Kristin. “And for ‘See You Soon’ we ran an electronic tabla machine through an amplifier and then I played drums along with it. That’s the sort of thing I think we wouldn’t have spent the time to do on our other records.”

 Jukebox the Ghost formed in college in 2006 and has been a steadily growing cult favorite and a globally touring band ever since. Composed of Ben Thornewill (piano/vocals), Tommy Siegel (guitar/bass/vocals) and Jesse Kristin (drums/vocals), they have played over 1,000 shows across the country and around the world over the course of their career. In addition to countless headlining tours, they have also toured as openers alongside Ingrid Michaelson, Ben Folds, Guster, Motion City Soundtrack, A Great Big World and Jack’s Mannequin, among others. In addition to festivals like Lollapalooza, Outside Lands, Bonnaroo, and Bottlerock, Jukebox the Ghost has also performed on The Late Show with David Letterman and Conan. Their 2018 national headlining tour will take them to their largest headlining venues to date across April and May.

Sours: http://www.jukeboxtheghost.com/

Similar news:

I've been drawing jukeboxes lately. 

Colored Sharpies

They're all quick sketches with a black Sharpie - no planning, no erasing, no changing. 

Black Sharpie, colored pencils, and Stickles

My jukeboxes are far from perfect. They're lopsided and irregular, but I love them.


I've colored in each one with different media. 

Mr. Sketch Markers

You can draw your own jukebox in just a few easy steps! First, draw an arc. Draw a rectangle connecting the two ends of the arc. Your arc can be tall and narrow or short and wide. 

Add a semi-circle just inside the top of the arc. Add a rectangle (or an inverted semi-circle) at the bottom. This will be the speaker. Again, there are no rules about any of this. You're the designer!

Add a rectangle in the middle of the jukebox where the songs are listed. Fill the bottom rectangle with crosshatches. Now add details - a record, musical notes, or whatever else you can dream up.

Finally, add some color! Jukeboxes come in every color you can imagine and often feature neon, sparkle, or other attention-getting shades. Turn on your favorite retro music to inspire your designs! If you draw a jukebox, let me know. I'd love to see your drawings.

Just for fun, I checked my theory that you can buy literally anything on Amazon and, sure enough, there are plenty of jukeboxes to choose from. Awesome! As much as I'd love to have a house big enough with a designated jukebox room, I do not. (I would also like to have a spare $9000, but I don't have that either.) How fun would the desktop CD player jukebox be though? Or the docking station?! So cute!  

Sours: https://www.cindyderosier.com/2018/03/how-to-draw-jukebox.html

1259 1260 1261 1262 1263