Wpf browser applications

Wpf browser applications DEFAULT

WPF XAML Browser Applications Overview

  • 9 minutes to read

XAML browser applications (XBAPs) combines features of both Web applications and rich-client applications. Like Web applications, XBAPs can be deployed to a Web server and started from Internet Explorer or Firefox. Like rich-client applications, XBAPs can take advantage of the capabilities of WPF. Developing XBAPs is also similar to rich-client development. This topic provides a simple, high-level introduction to XBAP development and describes where XBAP development differs from standard rich-client development.

This topic contains the following sections:

Creating a New XAML Browser Application (XBAP)

The simplest way to create a new XBAP project is with Visual Studio. When creating a new project, select WPF Browser Application from the list of templates. For more information, see How to: Create a New WPF Browser Application Project.

When you run the XBAP project, it opens in a browser window instead of a stand-alone window. When you debug the XBAP from Visual Studio, the application runs with Internet zone permission and will therefore throw security exceptions if those permissions are exceeded. For more information, see Security and WPF Partial Trust Security.

Deploying an XBAP

When you build an XBAP, the output includes the following three files:

FileDescription
Executable (.exe)This contains the compiled code and has an .exe extension.
Application manifest (.manifest)This contains metadata associated with the application and has a .manifest extension.
Deployment manifest (.xbap)This file contains the information that ClickOnce uses to deploy the application and has the .xbap extension.

You deploy XBAPs to a Web server, for example Microsoft Internet Information Services (IIS) 5.0 or later versions. You do not have to install the .NET Framework on the Web server, but you do have to register the WPF Multipurpose Internet Mail Extensions (MIME) types and file name extensions. For more information, see Configure IIS 5.0 and IIS 6.0 to Deploy WPF Applications.

To prepare your XBAP for deployment, copy the .exe and the associated manifests to the Web server. Create an HTML page that contains a hyperlink to open the deployment manifest, which is the file that has the .xbap extension. When the user clicks the link to the .xbap file, ClickOnce automatically handles the mechanics of downloading and starting the application. The following example code shows an HTML page that contains a hyperlink that points to an XBAP.

You can also host an XBAP in the frame of a Web page. Create a Web page with one or more frames. Set the source property of a frame to the deployment manifest file. If you want to use the built-in mechanism to communicate between the hosting Web page and the XBAP, you must host the application in a frame. The following example code shows an HTML page with two frames, the source for the second frame is set to an XBAP.

Clearing Cached XBAPs

In some situations after rebuilding and starting your XBAP, you may find that an earlier version of the XBAP is opened. For example, this behavior may occur when your XBAP assembly version number is static and you start the XBAP from the command line. In this case, because the version number between the cached version (the version that was previously started) and the new version remains the same, the new version of the XBAP is not downloaded. Instead, the cached version is loaded.

In these situations, you can remove the cached version by using the Mage command (installed with Visual Studio or the Windows SDK) at the command prompt. The following command clears the application cache.

This command guarantees that the latest version of your XBAP is started. When you debug your application in Visual Studio, the latest version of your XBAP should be started. In general, you should update your deployment version number with each build. For more information about Mage, see Mage.exe (Manifest Generation and Editing Tool).

Communicating with the Host Web Page

When the application is hosted in an HTML frame, you can communicate with the Web page that contains the XBAP. You do this by retrieving the HostScript property of BrowserInteropHelper. This property returns a script object that represents the HTML window. You can then access the properties, methods, and events on the window object by using regular dot syntax. You can also access script methods and global variables. The following example shows how to retrieve the script object and close the browser.

Debugging XBAPs that Use HostScript

If your XBAP uses the HostScript object to communicate with the HTML window, there are two settings that you must specify to run and debug the application in Visual Studio. The application must have access to its site of origin and you must start the application with the HTML page that contains the XBAP. The following steps describe how to check these two settings:

  1. In Visual Studio, open the project properties.

  2. On the Security tab, click Advanced.

    The Advanced Security Settings dialog box appears.

  3. Make sure that the Grant the application access to its site of origin check box is checked and then click OK.

  4. On the Debug tab, select the Start browser with URL option and specify the URL for the HTML page that contains the XBAP.

  5. In Internet Explorer, click the Tools button and then select Internet Options.

    The Internet Options dialog box appears.

  6. Click the Advanced tab.

  7. In the Settings list under Security, check the Allow active content to run in files on My Computer check box.

  8. Click OK.

    The changes will take effect after you restart Internet Explorer.

Caution

Enabling active content in Internet Explorer may put your computer at risk. If you do not want to change your Internet Explorer security settings, you can launch the HTML page from a server and attach the Visual Studio debugger to the process.

XBAPs typically execute in a partial-trust security sandbox that is restricted to the Internet zone permission set. Consequently, your implementation must support the subset of WPF elements that are supported in the Internet zone or you must elevate the permissions of your application. For more information, see Security.

When you use a WebBrowser control in your application, WPF internally instantiates the native WebBrowser ActiveX control. When your application is a partial-trust XBAP running in Internet Explorer, the ActiveX control runs in a dedicated thread of the Internet Explorer process. Therefore, the following limitations apply:

  • The WebBrowser control should provide behavior similar to the host browser, including security restrictions. Some of these security restrictions can be controlled through the Internet Explorer security settings. For more information, see Security.

  • An exception is thrown when an XBAP is loaded cross-domain in an HTML page.

  • Input is on a separate thread from the WPF WebBrowser, so keyboard input cannot be intercepted and the IME state is not shared.

  • The timing or order of navigation may be different due to the ActiveX control running on another thread. For example, navigating to a page is not always cancelled by starting another navigation request.

  • A custom ActiveX control may have trouble with communication since the WPF application is running in a separate thread.

  • MessageHook does not get raised because HwndHost cannot subclass a window running in another thread or process.

Creating a Full-Trust XBAP

If your XBAP requires full trust, you can change your project to enable this permission. The following steps describe how to enable full trust:

  1. In Visual Studio, open the project properties.

  2. On the Security tab, select the This is a full trust application option.

This setting makes the following changes:

  • In the project file, the element value is changed to .

  • In the application manifest (app.manifest), an attribute is added to the `PermissionSet element.

Deploying a Full-Trust XBAP

When you deploy a full-trust XBAP that does not follow the ClickOnce Trusted Deployment model, the behavior when the user runs the application will depend on the security zone. In some cases, the user will receive a warning when they attempt to install it. The user can choose to continue or cancel the installation. The following table describes the behavior of the application for each security zone and what you have to do for the application to receive full trust.

Security ZoneBehaviorGetting Full Trust
Local computerAutomatic full trustNo action is needed.
Intranet and trusted sitesPrompt for full trustSign the XBAP with a certificate so that the user sees the source in the prompt.
InternetFails with "Trust Not Granted"Sign the XBAP with a certificate.

Note

The behavior described in the previous table is for full-trust XBAPs that do not follow the ClickOnce Trusted Deployment model.

It is recommended that you use the ClickOnce Trusted Deployment model for deploying a full-trust XBAP. This model allows your XBAP to be granted full trust automatically, regardless of the security zone, so that the user is not prompted. As part of this model, you must sign your application with a certificate from a trusted publisher. For more information, see Trusted Application Deployment Overview and Introduction to Code Signing.

An important aspect of XBAP performance is its start time. If an XBAP is the first WPF application to load, the cold start time can be ten seconds or more. This is because the progress page is rendered by WPF, and both the CLR and WPF must be cold-started to display the application.

Starting in .NET Framework 3.5 SP1, XBAP cold-start time is mitigated by displaying an unmanaged progress page early in the deployment cycle. The progress page appears almost immediately after the application is started, because it is displayed by native hosting code and rendered in HTML.

In addition, improved concurrency of the ClickOnce download sequence improves start time by up to ten percent. After ClickOnce downloads and validates manifests, the application download starts, and the progress bar starts to update.

See also

Sours: https://docs.microsoft.com/en-us/dotnet/desktop/wpf/app-development/wpf-xaml-browser-applications-overview

XAML Browser Applications

XAML Browser Applications (XBAP, pronounced "ex-bap") are Windows Presentation Foundation (.xbap) applications that are hosted and run inside a web browser such as Firefox or Internet Explorer. Hosted applications run in a partial trust sandbox environment and are not given full access to the computer's resources like opening a new network connection or saving a file to the computer disk and not all WPF functionality is available. The hosted environment is intended to protect the computer from malicious applications; however it can also run in full trust mode by the client changing the permission. Starting an XBAP from an HTML page is seamless (with no security or installation prompt). Although one perceives the application running in the browser, it actually runs in an out-of-process executable (PresentationHost.exe) managed by a virtual machine. In the initial release of .NET Framework 3.0, XBAPs only ran in Internet Explorer. With the release of .NET Framework 3.5 SP1, which includes an XBAP extension, they also run in Mozilla Firefox.[1]

XBAP limitations[edit]

XBAP applications have certain restrictions on what .NET features they can use. Since they run in partial trust, they are restricted to the same set of permission granted to any InternetZone application. Nearly all standard WPF functionality, however, around 99%, is available to an XBAP application. Therefore, most of the WPF UI features are available.[2]

Starting in February 2009, XBAP applications no longer function when run from the Internet.[3] Attempting to run the XBAP will cause the browser to present a generic error message.[4] An option exists in Internet Explorer 9 that can be used to allow the applications to run,[5] but this must be done with care as it increases the potential attack surface - and there have been security vulnerabilities in XBAP.[6]

Permitted[edit]

  • 2D drawing
  • 3D
  • Animation
  • Audio

Not permitted[edit]

  • Access to OS drag-and-drop
  • Bitmap effects (these are deprecated in .NET 3.5 SP1)
  • Direct database communication (unless the application is fully trusted)
  • Interoperability with Windows controls or ActiveX controls
  • Most standard dialogs
  • Shader effects
  • Stand-alone Windows

See also[edit]

References[edit]

External links[edit]

Sours: https://en.wikipedia.org/wiki/XAML_Browser_Applications
  1. Daddy fnaf
  2. Universal login auth0
  3. Destiny guardian down
  • Launch AQTime and create a new empty AQTime project.

  • Select the Normal profiling mode on AQTime’s Standard toolbar.

    Select the Normal profiling mode on Visual Studio’s AQTime toolbar.

    Select the Normal profiling mode on RAD Studio’s AQTime Profiling Modes toolbar.

  • Choose Run > Parameters from AQTime’s main menu.Choose AQTime > Parameters from Visual Studio main menu.Choose AQTime > Parameters from RAD Studio menu. This will invoke the Run Parameters dialog.

  • Specify the following values in the dialog’s edit boxes:

    Specify custom host application:
    Parameters:

    The Run Parameters Dialog

    Click OK to save the changes and to close the dialog.

  • Switch to AQTime’s Setup panel and add your application’s executable (.exe) to the AQTime project.

    Typically, the .exe module resides in the <Application Folder>\Bin\Debug folder. However, if you published and launched your application, then it will be placed in the cache.

    • On Windows XP computers the cache is located here:

      <Documents and Settings>\<USER_NAME>\Local Settings\Apps\2.0

    • On Windows Vista and later machines the cache is located here:

      <Users>\<USER_NAME>\AppData\Local\Apps\2.0\

  • Now the project is ready for profiling. If needed, you can now create areas and tune triggers and actions.

  • Sours: https://support.smartbear.com/aqtime/docs/profiling-with/profile-various-apps/xbap-apps.html
    Should I Build a Desktop or Web Application?

    Chapter 17. WPF and browsers: XBAP, ClickOnce, and Silverlight

    • XBAPs
    • ClickOnce
    • Silverlight
    • Our whining about security and why other technologies have cooler names

    Although WPF is mainly about building Windows applications, there are many ways in which WPF can be used with browsers. WPF certainly isn’t going to replace ASP.NET any time soon, but there are several scenarios where you might want to use WPF when building applications that will be accessed via a browser. Three different technologies in WPF/.NET 3.x provide different mechanisms for accessing WPF applications over the web—XBAP, ClickOnce, Silverlight. We’re going to provide a brief summary of each technology here, and then go into more detail throughout the chapter, using the dictionary application as an example.

    XBAP

    XBAP, short for XAML Browser APplication, allows WPF applications to be run directly from within your browser. This is sort of like using ActiveX controls; you can have arbitrary code be downloaded and executed on the client machine inside the browser. The key difference is that, unlike ActiveX, .NET has a robust security model, so it’s possible to control what an XBAP is allowed to do. The ActiveX security model had two modes—don’t allow or (as one of our colleagues describes it) party on your hard drive.

    ClickOnce

    Silverlight

    17.1. Building an XBAP

    17.2. Using ClickOnce

    17.3. Using Silverlight

    17.4. Summary

    Sours: https://livebook.manning.com/book/wpf-in-action-with-visual-studio-2008/chapter-17/

    Browser applications wpf

    A thin glass bottle of perfume was sticking out of Elena Nikolaevna's shiny vagina covered with juices. This is what the girl has suffered. For the day, I laughed to myself. The member turned to stone again, sensing the proximity of an accessible female hole, and now furiously struggled away from the captivity.

    How to Add a Browser Component to WPF Application with DotNetBrowser 1.x

    Road. Makeup. There is no strength to wait for her. First, you should "flush in the bathroom yourself.

    You will also be interested:

    Sometimes such long business trips are overshadowed by dangerous work, but in this case, nothing like that happened. We lived in Latvia, where my husband trained foreign military pilots at the Skulte airfield. And that's why they sent us to India. The husband served there as an instructor-pilot.

    Of course, we went with joy.



    157 158 159 160 161