Repair food processor

Repair food processor DEFAULT

Food Processor Repair

Food processors are a handy kitchen appliance that allow users to make their farm-fresh food unhealthy by, instead, turning it into processed, frozen dishes. Just kidding. Food processors are named for their ability to complete repetitive food-prepping tasks much more evenly, efficiently, and quickly than a human could. Food processors can usually be paired with a variety of different blades and attachments, enabling different functions like pureeing, slicing, shredding, and grinding food. An S-shaped blade (also called a Sabatier blade), slicing discs, and shredding discs are standard food processor attachments. Common other attachments include a dough blade, egg whip, citrus juicer, non-citrus juicer, julienne cutting disc, and French fry disc.

The food processor was first produced in North America in 1973 by Carl Sontheimer. Once the public realized the true convenience of this machine, it became a staple in restaurants and homes. Today food processors are made by a range of kitchen appliance companies, including Oster, KitchenAid, Breville, etc.

Food processors come in a range of shapes, sizes, and colors. Most are designed to sit on a kitchen counter and have a transparent bowl with a place to deposit ingredients. Food processors also have a control panel, motor, and, usually, an electrical plug.


Food Processor Repair

Food processors do a little more than your average kitchen appliance, so they may require more repairs. We have created a symptom and repair guide to help guide you through fixing your appliance yourself as efficiently and effectively as possible. First, select the symptom that applies to your food processor, from there, we narrow down the parts that could be causing the issue. Once you have determined the part that needs to be replaced, read our tips for how to get it back to working perfectly.

Leaks liquid

Reported 31% of the time


A repair is needed if your food processor is leaking liquid. Our experts have narrowed down the most common parts for causing this problem to the bowl, lid, and seal. Use our guide to help determine which part needs to be replaced and how you can quickly and easily fix it yourself.

Controls or buttons don't work right

Reported 12% of the time


If the buttons aren't working right on your food processor, this can be frustrating. Read our guide for tips on what to check for if this problem is occurring. It might be something as simple as aligning the lid properly. If you require specific advice for your model, refer to your owner's manual.

Burnt or electrical smell from motor

Reported 6% of the time


If you can smell a burnt or electrical smell coming from the motor, this is something that will need to be repaired, and you can do it yourself, with our help. Check the blade, gears, and slicer for signs of wear tear. Use our repair guide for tips on how you can fix your appiance yourself as quickly as possible.

Grinding or squealing sound

Reported 6% of the time


Is your food processor making a grinding or squealing sound? Before you consider purchasing a new appliance, try troubleshooting and diagnosing the problem yourself. Use our guide to assist you in determining what parts to check and how they can be fixed. Start by checking the blade, gear, adapter, extension, disk, and stem.

Trips the power source circuit breaker

Reported 1% of the time


If your food processor trips the power source circuit breaker, check the blade and motor for signs of damage. Read on for instructions on how you can repair the appropriate part yourself as quickly and easily as possible. Refer to your owner's manual for detailed instructions for your model.

Excessive sparks from motor

Reported 1% of the time


If the motor of your food processor is giving off excessive sparks, this may indicate a need for a repair. This is generally a simple repair that you can do yourself with not much effort or time spent. Check the blades and attachments for signs of wear and tear. For more detailed advice for your model, refer to the owner's manual provided by the manufacturer.

  1. Ocala military surplus
  2. Turf dst
  3. Corningware tray

Food Processor Repair

Food processors are food mixers on steroids. This Fix-It Guide on food processor repair tells how a food processor works, what often goes wrong, how to identify a food processor problem, and what parts and tools you will need to fix it. It then gives simple step-by-step instructions for how to disassemble a food processor, how to service a food processor gear, how to adjust or replace a food processor drive belt, and how to service a food processor drive shaft. This Fix-It Guide also directs you to electrical cord repair, motor repair, fuse repair, and switch repair if needed.

How Does a Food Processor Work?

Food Processor Repair

Belt-drive food processors have the blade at one side of the motor.

A food processor is an appliance that mixes dough and chops, slices, dices, and liquefies food. It has a larger capacity and a larger motor than either a blender or a mixer and can replace both smaller appliances.

There are two types of food processors: direct drive and belt drive. A direct-drive food processor is similar to a food blender, with the motor underneath the food bowl. A belt-drive food processor places the bowl and motor side by side, connecting the two with a drive belt and wheels.

What Can Go Wrong with a Food Processor?

Because they can do more, food processors may require more repair than other small kitchen appliances. Even so, there are many similarities. The electrical cord, motor, motor fuse, and switches may fail. The blade can become dirty or damaged. The gear or drive belt can become worn or broken. Seals can fail. One of the most common problems is a belt that needs adjusting or replacing.

Fix-It Tip

Every time you wash a food processor’s bowl and blades, take time to inspect them for obvious cracks or damage.

How Can I Identify a Food Processor Problem?

Food Processor Repair

Direct-drive food processors have the blade above the motor.

  • If the food processor won’t run at all, be sure power is on at the outlet and check the electrical cord. Check the motor and the fuse.
  • If the unit runs intermittently, check the wire connections and repair any that are faulty. Also check the motor and, on belt-drive models, check the belt for condition and correct tension. Replace or adjust as needed.
  • If the unit doesn’t run at some speeds, check the multi-speed switch and the wire connections using a multimeter.
  • If the motor turns, but the blades don’t, clean and lubricate the blade and repair or replace if damaged. On direct-drive models, check gears for wear and replace if worn or broken. On belt-drive models, check the drive belt and replace it if it is broken, or adjust tension if needed.
  • If the bowl leaks, make sure the bowl is tightened onto the base; check the seal and replace it if it is damaged.

Fix-It Tip

About once a year, apply a small amount of white lubricant paste (available in tubes) on gears, bearings, or other moving parts to reduce friction. Make sure the lubricant doesn’t touch or rub off on electrical components, where it can conduct electricity.

What Do I Need for Food Processor Repair?

Motors, drives, gears, and belts should be replaced with parts from the manufacturer or an authorized aftermarket supplier. Common tools for disassembling and repairing food processors include these:

  • Screwdrivers
  • Pliers
  • Wrenches
  • Lubricant
  • Multimeter

What Are the Steps to Food Processor Repair?

Disassemble a food processor:

  1. Remove the control knob and remove any screws that hold the body together.
  2. Remove plugs as needed to disconnect the circuit board from the electrical source. Remove other components that restrict access to the internal parts.
  3. Turn the processor upside down and remove the base. In some cases you’ll first need to pry off some feet.
  4. Remove the drive belt and/or the drive gear.
  5. Remove the motor. Typically, this means disconnecting the cord and removing any motor mounting screws.

Service a food processor gear:

  1. Remove the processor’s housing and components as needed to access the gears (see motor).
  2. Clean the gears with a toothbrush and inspect them for wear or damage.
  3. Replace any damaged gears. If the gears are in good condition, lubricate them and reassemble.

Adjust or replace a food processor drive belt:

  1. Remove the housing as needed to access the drive belt.
  2. Move the drive belt by hand to determine if the belt is too loose or too snug.
  3. Loosen the adjustment wheel setscrew or nut and adjust the belt tension as needed.
  4. If necessary, replace the belt with one of the exact same dimensions.
  5. Make sure the adjustment screw or nut is tightened so it does not work loose.

Service a food processor drive shaft:

  1. Disassemble the unit to expose the drive shaft.
  2. Turn the drive shaft by hand; if it turns easily, it is probably worn and requires replacement.
  3. Remove the drive shaft following instructions in the owner’s manual. Some units pry off while others are held in place with standard fasteners.
  4. Inspect the old drive shaft for the cause of the problem. Repair or replace as needed.
Kitchen Aid 7 Cup Food Processor Repair (Won't Turn On)

Restoring a food processor to service

The blades of a food processor fit onto a shaft that is turned by an assembly of pulleys, gears and a toothed belt. To protect the user from injury, a safety switch allows the blades to rotate only when the bowl is properly seated over the base and the bowl cover is locked in place.
To repair a food processor, take off the bottom of the housing and remove the motor cover. Test the electric cord, the safety switch and the on/off switch for continuity; if they do not show continuity, replace them. Inspect the motor for damaged or burned windings; if you find any, replace the motor. If the motor runs but the shaft does not turn, look for a stripped reduction gear or a broken pulley belt. To replace the belt, slip a new one around the pulleys. Replace a stripped gear as shown below.

Replacing a food-processor gear. 

With the bottom of the housing and the motor cover removed, slip off the pulley belt. To replace the small reduction gear on the motor shaft, immobilize the shaft by inserting a screwdriver between two blades of the fan on the base of the motor; unscrew the gear with your fingers, and screw on a new gear. To replace the large reduction gear on the motor cover, slip the broken one off and replace it with the new one.

Processor repair food

Tell me, Vlad. How did you come up with the idea to meet with Christina. I received a personal mail from someone unknown that Christina, my classmate, still remembers me and wants to meet.

food processor repair

Everyone introduced me as his slave who recently said goodbye to virginity. We went with him to the toilet where he gave me to different men. But so far he only allowed suction. I already got used to being a whore and responded to the name of Light.

You will also be interested:

So I licked all the creampie and rubbed a little in the crotch. As I walked, the semen dried up and I felt a pleasant feeling, where it was. Today I. Am wearing a light flowing scarlet dress. I am without underwear.

1598 1599 1600 1601 1602