Star destroyer drawings

Star destroyer drawings DEFAULT

STAR WARS: THE GALACTIC EMPIRE

The Star Wars Technical Commentaries site is probably the best tech reference site for the Star Wars universe, and has links to many others. You can get to it directly or through Force.net

Imperium Class Ultra Star Destroyer The embodiment of Palpatine's plans for extra-galactic conquest, the Imperium would have been as powerful as a Death Star, but much more mobile. Equipped with a small fleet of capital ships, thousands of fighters, and innumerable support craft, the Imperium would have had virtually unlimited range since it would also have carried several World Devastators to produce needed supplies. With this ship, the immortal Palpatine would have spread the Empire across the universe. Rumors suggest that the crew would also have been "immortal" as well, thanks to cloning equipment that would have been onboard. Thankfully, Palpatine was not as immortal as he had hoped, and the ship never progressed beyond initial planning before his final death. While some die-hard Imperials wanted to try and actually build it to use against the New Republic, saner heads prevailed and the Imperium remained only a terrible dream.

Eclipse Class Super Star Destroyer The resurected Palpatine's flagship in the Dark Empire comics. The size shown here is based on the assumption that the "canon" length of about 17 km was based on the 8km Executor length. So, I scaled it up when the Executor was scaled up, since I believe that the Emperor would have the biggest, scariest flagship possible.

Sovereign Class Super Star Destroyer Pretty much the same comments as the Eclipse, though the drawings is mostly guesswork, since no real drawings of the Sovereign have ever been published to my knowledge.

Executor Class Super Star Destroyer Vader's flagship, note that I subscribe to the larger size, not the 8 km length made popular by the earlier novels and the old RPG.

Super Star Destroyers A comparison of the Executor, and two "non-canon" Super Star Destroyers. The names, "Malevolent", and "Inquisitor" are my own, but the designs are from the Empire Strikes Back sketchbook.

Allegience Class Super Star Destroyer A smaller command ship, midway between the smaller Destroyers and the giants like the Executor. It appeared in the Dark Empire comic series.

Star Destroyers A comparison of four Imperial Star Destroyers, the Imperator/Imperial Class, the Victory Class, and two non-canon designs, the Spectre, based on a concept drawing for the Executor, and the Eradicator, my design for a small ISD intended as an escort. The Spectre is intended to be a fast destroyer, optomized for ship-to-ship combat, lacking most of the ground attack capability of the Imperator and Victory.

Various Smaller Imperial Starships compared to an ISD. These are all from the WeG RPG.

Interdictors A comparison of two Imperial Interdictors, the larger Dreadnought is from the X-Wing comic series.

AT-AT Stock Imperial All Terrain Armored Transport.

AT-ET All Terrain Escort Transport, an escort walker, equipped with powerful defensive weaponry. The missile and laser turrets replace the troop bay and provide excellent anti-speeder defenses. Smaller mounts, based on E-Web cannons, are mounted underneath the hull and head to defend against infantry. Regretfully, it entered service after the Battle of Hoth and was not put into widespread service before the death of the Emperor. Soon after Endor, Rebel commandos, aided by disgruntled workers, destroyed the primary production facility and the changing political/military situation ensured that the AT-ET never was produced in large numbers.

LINKS

The Star Wars Deckplan Alliance A website devoted to creating detailed, logical deckplans to both canon and fan created ships.

 

Sours: http://wolfsshipyard.com/starwars_Imp.htm

The Real-Life Engineering Inspirations Behind Star Wars' Spacecraft

It is no secret that the events and technology of World War II heavily inspired George Lucas' vision of a galaxy far, far away. However, some of the nuts and bolts of the ships featured in the series had some very unlikely and frankly surprising origins. 

Buckle up.

1. The Star Destroyer was based on real-life warships, sort of

Perhaps one of the most awe-inspiring vessels of the Star Wars Universe, the Imperial Star Destroyer is one of sci-fi's most iconic spaceships. Designed by Industrial Light and Magic's Colin Cantwell, these ships were inspired by the look of real-life battleships, at least in part.

Early examples were made using parts from modern warship model kits ("kitbashing") but were given more protrusions than a warship, for a more "three-dimensional" feel, and were given a "dagger" shape to make them look more threatening. Their iconic grey color is a direct reference to their warship origins, but was also a design choice, so the model would contrast better with bluescreen backgrounds. 

Originally, these ships were going to be two-pilot starfighters, but this was later revised to the ship we all know and love today.  

2. The Mon Calamari Cruiser is basically a giant pickle

Since we've mentioned the Star Destroyer it would be remiss of us to include another of the universe's iconic starships -- The MC80 Mon Calamari Cruiser. Completely alien and sleek in design, these ships feature truly inspired designs. 

Designed to be as different from the Imperial Star Destroyer as possible, their final organic design was unofficially given the nickname "pickle ships" by the team at Industrial Light and Magic. Interestingly, this is one of the few ship designs in the franchise that precluded the ability to "kitbash" them together from existing model kits. Instead, the original models were made using a process called vacuum forming.

While not officially based on a pickle, the ship's designer, Colin Cantwell has also not officially ruled it out. "It was about 30 years ago that I came up with the concept. I just guess I have a vivid imagination," he said in a Reddit "Ask me anything".  

3. The Death Star's design was a mixture of planning and screwups

The planet-destroying space stations, called the Death Star(s), are another of the Star Wars franchise's most well-known model designs. As well as posing an interesting problem within the Star Wars universe, the real-life inspiration for them is quite interesting. 

The overall ball shape was inspired by some of the artwork of John Berkey. His work, incidentally, also helped inspire other aspects of the Star Wars universe. However, some elements of its final design were not planned.

When Cantwell was told the station was going to be shown near planets, he decided to make the entire station silver, so it could be easily seen from any angle in space. Cantwell also hand-etched and inscribed all the details of the station so they showed when the light was cast on it.

According to Colin Cantwell, the model was also not originally intended to have a trench. 

When building the Death Star prototype, Cantwell ordered a styrene globe. It arrived in two halves, and he scribed the individual hemispheres to create a "villainous effect". However, when he tried to connect the two halves together, Cantwell discovered that the equator of the plastic had shrunk around the edges. It would have been almost impossible to connect the halves so that stage lighting would not show this flaw. 

So instead, he came up with a cunning plan for the station to have a trench all the way around its equator, between the two halves, "where the opposing sides would be shooting at each other in dramatic fight scenes." To convince Lucas, Cantwell suggested that the exhaust port be placed inside this trench, and the Rebels could fly along inside it. Not only did Lucas like the sound of this, but it also saved Cantwell a lot of work.

This serendipitous mistake would turn out to become one of the franchise's most iconic moments. 

4. The X-Wing is actually based on a dart

The Incom T-65B X-Wing Starfighters, the mainstay of the Rebel fleet, is yet another fan favorite the world over. Its sleek, dare we say sexy, contours really make this fantasy craft look like it could actually fly. 

And that is exactly the point. The design, according to its creator, Cantwell, had to be "ultracool". Drawing inspiration from real-life jet aircraft, the design of the X-Wing is one that has really stood the test of time.

But the main inspiration for its overall look is something you might not expect -- a dart. Colin Cantwell, when asked on this very subject, said he was inspired to create the design when watching a game of darts in a British pub. 

Building on that initial starting point, the first prototype models were "kit-bashed" using pieces from model kits, like the nose section from a 1/16 scale model dragster model. Cantwell has said that the S-foils were inspired by the look of a cowboy drawing a gun.

The original plan for the X-Wing was said to include wheels on the landing gear. This was because George Lucas had hoped to hire the Spanish Air Force and redress their F-104 fighter jets as Rebel fighters, then film them taxiing and taking off. When this was found to be too expensive, Cantwell replaced the wheels with landing pads.

5. The "Millenium Falcon" was partially based on the Boeing B-29 "Superfortress"

The "Millenium Falcon", a modified Corellian YT-1300 light freighter, is one of the most iconic and recognizable craft from any sci-fi film ever made. So many of us are familiar with its form, that it can be hard to imagine that it was once just the figment of its designer's imagination. 

But what inspired it? 

The cockpit, at least the internal view, is famously inspired by the real-life cockpit of the B-29 Superfortress heavy bomber from WWII. The original model of the "Falcon" was also made from many bits and pieces of other model kits -- like Panzer tanks, Tiger tanks, Messerschmitt ME 109 fighters, etc.

As for the main fuselage, the design was allegedly a blend between a half-eaten hamburger and a flying saucer.

Interestingly, the now equally iconic sound of the "Falcon" came from the real-life sounds of a P-51 Mustang flyby. Industrial Light and Magic engineers Doppler-warped the recording and mixed it with the odd thunderclap or lion's roar!

6. The CR90 Corvette "Rebel Blockade Runner" was based on an early design of the "Millenium Falcon"

The very first vessel that audiences were treated to during the opening sequences of "Star Wars: A New Hope", is the "Tantive IV," another iconic sci-fi spaceship. A version of the Corellian CR90 Corvette (from the canon), the original remit was for a ship that looked utilitarian, durable, and modular. 

The design of this ship actually comes from a concept piece developed by Colin Cantwell that was intended to be, at least initially, the "Millenium Falcon". However, when a similar design was released in the Space: 1999 TV series, Industrial Light and Magic decided to mix things up a bit.

The initial concept for the "Millenium Falcon", according to Cantwell, was a ship that resembled an alert lizard with its legs extended.  

The newer concept was scaled down and revised with the WW2-style cockpit, and mid-section gun turrets being retained. After filming had finished, the model found its way into the collection of Grant McCune, until it was sold in 2015 for an eye-watering sum of $450,000.

7. The TIE Fighter's design is like nothing of this world

The Imperial TIE Fighter is possibly one of the greatest designs for any spacecraft ever conceived. Completely unique, this craft is instantly recognizable by anyone who has ever watched the films. 

Designed by Colin Cantwell, the idea behind the craft's design was to make it as alien and villainous as possible. According to Cantwell's own recollection, the design came quite as an accident as he was scribbling a drawing. 

Within his scribble, he noticed something that would eventually later be fleshed out into the final design as we know it. The ship's function was intentionally left as a mystery, and it was never explained how the pilots would enter or exit the craft.

How the craft landed or took off was also left purposefully unexplained. However, Cantwell's original designs were pretty thin on detail. His colleague, Joe Johnston, added some extra features like the ball cockpit window and attachment points for the solar panel wings. 

Some have also pointed out that the TIE Fighter may have also be inspired, in part, by orbital satellites -- hence the fighter's famous wings. The original idea was to paint the TIE fighters blue, but this was later revised to grey for better contrast against a bluescreen.

In later films, you may notice, TIE fighter colors actually change to a muted blue. If you don't believe us, you now have a worthy excuse to watch the films to check. You are welcome. 

8. Queen Amidala's starship was actually inspired by a real-life jet

Switching trilogies to the prequels, Queen Amidala's shiny and sleek royal transport ship is another iconic vessel from the franchise. Technically a J-type 327 Nubian Royal Starship (according to Star Wars canon), this ship is a truly inspired design. 

According to some sources, the overall sheen of the craft was inspired, in part, by the chrome hood ornaments seen on older 1950s automobiles. Her overall shape is, in case you haven't guessed, a nod to the equally iconic Lockheed SR-71 "Blackbird" reconnaissance jet. 

Interestingly, the original script for "Star Wars: A New Hope", was to feature a "small silver spacecraft [emerging] from behind one of the Utapau moons". This was later amended to feature the now-famous chase sequence between "Tantive IV" and the Star Destroyer "The Devastator". 

9. The Nebulon-B frigate was based on an outboard motor

And finally, another iconic, if lesser-known, Star Wars spacecraft is the "Rebel Medical Frigate", or EF76 Nebulon-B Escort Frigate for Star Wars fans. Designed by Industrial Light and Magic's Nilo Rodis-Jamero and Joe Johnston the spaceship's design is very unique.

Allegedly the design was inspired by George Lucas' suggestion to make it resemble an outboard motor. The final model was made under tight time constraints and funds and include components leftover from other "kitbashing" exercises. 

Parts used included space battleship hulls and artillery pieces. The final model, as featured in the films, was just under 2.5 meters (100 inches) long, and around 1 meter (40 inches) tall. 

And that, Star Wars fans, is your lot for today. Information on the inspiration behind the starship designs is pretty thin on the ground, so let us know if you have any insider knowledge on any of these, or other, Star Wars craft. 

Sours: https://interestingengineering.com/the-real-life-engineering-inspiration-behind-star-wars-spacecraft
  1. Mechanical deadbolt lock
  2. Workbook in java
  3. Metalcore 2020
  4. Free nfl fonts
  5. Hiawatha trail reviews

SF and fantastic models

After talking about the optical fiber and the Arduino programming, last WIP for this build up : the Imperial Star Destroyer paint job. Two major challenges in this paint job : the model is single-coloured (in fact that’s not totally true but that’s the most common representation) and the colour is hard to define : white ? grey ? grey-white ? Tricky. In this article I try to explain every step required to get a satisfactory result. Bye the way, many Star Wars ships (or others) can be treated this way.

The undercoat

Imperial Star Destroyer : underlayer

No difficulty here : the model is totally covered with a chrome-silver acrylic paint. Why a silver paint ? We can find quite evidently 4 benefits :

  • metallic paints are rather sticky and easily adheres to almost any surface
  • the neutral tint does not affect the upper paint layers
  • it can be interesting to scratch the upper paint layers here and there to reveal metallic shards on the model (but not this one)
  • the drying time is very short, half an hour at max (depends of the temperature of course)

The thing you should absolutely not do :

About the undercoat, many model makers use an universal primer (you can find them in auto parts stores). Bad idea with a polystyren model : the stickness is awful. Consequently, entire areas can detach and let the plastic naked. You must use those primers with resin kits only.

The pre-shadding

Just after the undercoat, a mat black paint is sprayed into all the gribblies areas (that is non-smooth ones). This technique replaces the usual “wash drawing” step in these areas wich is sometimes unsatisfactory, especially at this scale (1/2700). Indeed, you can’t see the oil runs or soot spots at this scale.

Imperial Star Destroyer : pre-shadding

The base colour

Once these two steps done, the base colour is applied. But which one is it ?

Imperial Star Destroyer : base colour

I chose a white-grey very very white : 80% mat white mixed with 20% sky grey (XF19 in Tamiya’s). However, this tint will be altered later to be lightened and become whiter. Watch carefully the preshadding into the gribblies areas : the surface hollows are accentuated.

The wash drawing

Once the base colour is dry, a gloss varnish is applied (klir varnish diluted) onto the all model surface. The gloss varnish allows the wash drawing to slide on the surface and so to go into the hollows.

Imperial star destroyer : wash drawing

The wash drawing consists simply on applying a grey oil paint into the model hollows. The panel lines will be especially treated.

Once the wash drawing is naked-eye dry, it must be wiped, so the paint stays only into the hollows.

Imperial Star Destroyer : left wash drawing

You can easily see on this picture the difference before/after the wash drawing treatment.

The fading

Eventually, the last step consists on masking a few panels and spraying a very light grey coating. I usually use grey ink et not paint for this step. The ink is thinner and allows to spray very transparent coating.

Imperial Star Destroyer : ventral panelling

In this way you can control perfectly the intensity of your coating for each panel. With the same ink load, you can easily get different tints from a panel to another depending on the number of passes.

Imperial Star Destroyer paint job : conclusion

This kind of scale model requires many painting steps. You cannot be happy with a plain rendering even though the movie model seems to have one.

The ship size generated a huge painting time, at least 30 hours. The longest was the wash drawing sonce I had to go ionto every single panel line.

I’m quite proud of the result, my client too – I guess. This made me want to build my own Imperial Star Destroyer I bought years ago : this big model from Anigrand.

Sours: https://www.fantastic-modelers.fr/en/imperial-star-destroyer-3-paintjob/
Star Destroyer Supercut

Draw Star Destroyer

How To :Draw Star Wars comic books focusing on shots & angles

Star Wars artist Matt Busch returns- this time giving tips on taking drawing skills to the next level: comic books! This episode focuses on how to illustrate through visual storytelling in panels through shots and angles. Learn how to draw Star Wars by watching this video art ...more

How To :Draw Star Wars Storm Troopers and learn light &shadow

Artist Matt Busch shows how to render a full value monotone comp for his STAR WARS 30th Anniversary movie poster. In addition to getting into the nitty gritty of light and shadow in sketches, see Matt show you how to draw Stormtroopers, as well as busting out his killer happy ...more

How To :Origami a star destroyer air plane

This video origami tutorial shows how to fold a star destroyer paper airplane out of a single sheet of square paper. Never bold another boring paper airplane again. Watch and follow along with this instructional video to learn how to fold an origami star destroyer paper airplane.

News :Construction on the Star Destroyer

Hey guys, corndog97 here! As most of you know I have been working on an extensive mega build with my friends Knight Skelly, Killer Oliver, and HUD (howcanudothis). I have to say, my mates have done such a good job, and picked up the pattern within an hour. Here's what it looks ...more

How To :Draw the Death Star from "Star Wars"

Calling all "Star Wars" fans and artists: this quick video will show you the basics of drawing the infamous Death Star from Star Wars. It's just like draw a planet, except more detailed and intricate, but anybody should be able to draw this cartoon version of the Death Star. I ...more

How To :Draw a Star Wars poster with colored pencils

As artist Matt Busch completes drawing the 30th Anniversary STAR WARS poster, you'll see great tips on how to render color, texture, and details with colored pencils you can't otherwise get with a brush. Learn how to draw Star Wars with this instructional art technique video.

How To :Draw a star

Follow the guidelines outlined in this video to learn how to draw a star well. The first step is to draw a letter V upside down. Secondly move the paper clockwise and draw another V upside down connected to the previous V. Keep repeating this process of turning the paper, unti ...more

How To :Draw Lucky Star manga characters

Big fan of the four panel manga comic strip, Lucky Star? Learn how to draw characters from the series with help from Drawing Now. Search WonderHowTo for more videos from Drawing Now to learn how to draw a variety of characters and cartoons!

How To :Draw Yoda from Star Wars

Want to recreate the magic of Star Wars? With the help of a pencil, some paper, and this how-to video, you can sketch Yoda anywhere, anytime. Watch this video drawing tutorial and learn the simple steps of rendering Yoda, starting with basic shapes and ending up with a complet ...more

How To :Draw a custom star in Fireworks CS3

In this video tutorial, you'll learn how to draw a custom star in Adobe Fireworks CS3.

How To :Draw the Golden Star (the Twelve Signs)

Learn How to draw The Golden Star (The twelve signs) with the best drawing tutorial online. For the full tutorial with step by step & speed control visit: How to draw. Video: .

How To :Draw Luke Skywalker from Star Wars and complex figures

This video tutorial features all kinds of tips on drawing the human head; in this case you will learn how to draw Luke Skywalker and make starships out of simple shapes. Learn how to sketch Star Wars by watching this drawing video.

How To :Draw Darth Vader from Star Wars

In this video, we learn how to draw Darth Vader from Star Wars. Start out by drawing the outline for the body, then draw in reference lines around to figure out where the facial features will go. From here, use a darker paint brush to make the outline darker and then erase any ...more

How To :Draw Obi-Wan from Star Wars

In this video tutorial, viewers learn how to draw Obi-Wan from Star Wars. Begin by drawing a circle for the head and rectangular shape for the jaw. Then draw a line 1/3 way across the circle. Draw the eyes on the line and the nose just underneath the line. Now draw 2 lines fro ...more

How To :Draw a scene from Star Wars

In this tutorial, we learn how to draw a scene from Star Wars. Start off by coloring the background peach, then adding orange with the spray paint tool to the bottom. After this, color in clouds to the sky with a light tan. From here, add in a spaceship in the sky and then two ...more

How To :Draw Boba Fett from Star Wars

Easy to follow step by step instructions for drawing the Star Wars character Boba Fett.

How To :Draw Anakin Skywalker from Star Wars

Seven easy basic art methods and steps to drawing Anakin Skywalker. The first 1-3 steps illustrates the basic drawing methods for the human head shape, and line placement for a basic human head. The fourth step illustrates basic drawing of the eyes, nose, mouth and ears. Step ...more

How To :Draw Luke Skywalker from "Star Wars"

Bring the magic of the original "Star Wars" movie back to lift, right in your own home. Learn how to draw Luke Skywalker from Star Wars - Episodes IV through VI. Luke Skywalker is the epitome of the Jedi force, so relive that spirit in your own cartoon version of the Jedi mast ...more

How To :Draw Darth Vader from "Star Wars"

Darth Vader is the legendary sci-fi character from the Star Wars movies. Everyone has heard of the Star Wars Trilogy, right? The older ones from the 70's? Darth Vader is the primary antagonist from those intergalactic space flicks. DragoArt has this video tutorial on how to dr ...more

How To :Draw Princess Leia from "Star Wars"

If you're into the "Star Wars" movies (the old ones, not the new ones), then this drawing tutorial might peak your interest. It's easy to do and anyone can draw it. You don't need to be a professional cartoonist to get this Princess Leia drawing done. Drawing her amongst the s ...more

How To :Draw a sketch of rap star Jay-Z step by step

Reduce the human face to a series of basic lines and shapes so you can easily draw anything. This tutorial shows you how to use this technique to draw a realistic and fully proportionate sketch of the rap star Jay-Z.

How To :Draw Stormtroopers and Clonetroopers from Star Wars

Star Wars artist Matt Busch takes you though the steps to drawing elite Stormtroopers. Using basic shapes, Busch shows you how to construct three-dimensional trooper armor. Learn how to sketch Star Wars by watching this video drawing tutorial. If you like drawing Star Wars, th ...more

How To :Draw the Clone Troopers from Star Wars

In this video, you can see how to easily draw the Storm Troopers from the Star Wars movies. Start out with the feet, which are a couple of easy circles. Then draw the lower half of the legs, with basic shapes again to form up to the knee. For the knees themselves you draw a sh ...more

How To :Draw a Wookiee or Chewie from Star Wars

In addition to going over sketchbooks, this video tutorial focuses on all things Wookiee, and shows tricks on how to render a drawing without even a photo reference to look at. Learn how to sketch Star Wars by watching this how-to art video.

How To :Draw Yoda the Jedi master from Star Wars

In this tutorial, we learn how to draw Yoda the Jedi master from Star Wars. You will first need to draw the basic body of Yoda, don't forget those long ears. After this, add in the small eyes and the rest of the facial features. Next, you will add in the details for the clothi ...more

How To :Draw Konata from the manga Lucky Star

Drawing Japanese schoolgirls is one of the staples of manga-style art. Here, the drawing instructors at Drawing Now demonstrate how to draw Konata, one such character from teh manga series Lucky Star. Here are step-by-step instructions from the artist: 1. First sketch konata' ...more

How To :Draw and ink Han Solo and Darth Vader from Star Wars

Artist Matt Busch goes over how to build graphic contrast with several inking techniques and styles on Han Solo. The episode also shows how to paint in the darkest darks with acrylic paint, as progress continues on the 30th Anniversary STAR WARS Poster. Learn how to sketch, in ...more

How To :Draw Disney's Most Famous Cartoon Character — Mickey Mouse

On November 18th, 1928 a star was born. His name— Mickey Mouse. Actually, Walt Disney's most famous character appeared before that date, but nonetheless, November 18th is known as Mickey Mouse Day, because that's when he appeared in Steamboat Willie, the first cartoon to featu ...more

How To :Maintain the Powerful BowTech Destroyer Hunting Bow

When you think of archery bows, you think of a curved piece of wood. You can feel the taut string between your fingers. Images of Robin Hood appear, stealing from the rich and giving to the poor. You think of simplicity. But when it comes to hunting, a bow is an entirely diffe ...more

How To :Draw a Christmas tree on MS Paint

The first step in drawing a Christmas tree in Microsoft Paint is to open up the program and click on the line button on the left hand side of the toolbar. Start with where you want the top of your tree to be. Click and pull down the cursor about an inch and a half on a 45 degr ...more

How To :Draw a unique Christmas tree with scribbles

A video from http://www.donpower.me that shows how to draw a simple Christmas tree. This video is basically for kids. The presenter in this video, shows how using simple crayons a Christmas tree can be drawn in not time. The short duration of this video (0:59 seconds) is proo ...more

How To :Draw a nerdy guy with glasses, braces and big ears

Portrait drawings are difficult for most artists, but one thing's for sure— drawing nerds is as easy as they come. Nerds are easier to draw because you can stray from the formality of portraits, putting your own spin on it, over-compensating the details, exaggerating the dorky ...more

How To :Create a simple swatch in Illustrator

This video tutorial by Tasktutorial shows you how to create a simple swatch in illustrator. Select the star tool, draw a star and select the path and scale it down as shown. Change the fill color to white, the stroke color to black and the stroke weight to 2 points as indicate ...more

How To :Create a 3D star in Illustrator

Do you have interest in creating 3D objects? Open illustrator and draw a star tool with gradient fill in it. Then go to effects>3D>Extrude/Bevel. Select preview to view the star in 3D while changing its settings. One can rotate the star in any angle as well as change the thick ...more

How To :Draw Eminem's face completely from memory

This tutorial shows you how you can draw a picture of Eminmem almost completely from memory. Draw the rap star in three quarters view, and make sure that you have all the facial proportions (such as the spacing of the eyes and lips) correct.

How To :Draw Calumon from Digimon

In this how to video, you will learn how to draw Calumon from Digimon. First, start off with two circles for the head and body. Next, add the ears and oval shapes for the feet. From here, you can trace these shapes to create a more accurate depiction of Calumon. Go into the fa ...more

How To :Draw a cartoon tractor and other fun things

Cartoons are great because they can bring anything to life. In this video, you will learn how to draw a cartoon tractor that could star in its own comic strip. Learn to draw by watching this video and studying the artist's technique.

How To :Create draggable masks in Flash

1. In the Flash Application go to new and select Flash File ActionScript 3.0. 2. Change the stage size to 600*450(width and height) in the property section. 3. Then goto file import image and select the background image. 4. Rename the layer1 to image and go to modify->convert ...more

How To :Draw a car in MS Paint

Microsoft Paint has the capability to allow you to draw an awesome realistic car. This video will show the line and filling tools that someone uses to make a sporty car. You can make whatever alterations and adjustments to create your own unique dream car. Draw in wheels of th ...more

How To :Make Mario Party star coin decorations

In this video, we learn how to make Mario Party star coin decorations. First, trace templates for the star coin onto a large piece of gold paper. You can get these templates from CoolPartyBlog. After you have traced the entire outline, retrace using a permanent marker, you wan ...more

How To :Draw a Rebel flag

In this video tutorial, viewers learn how to draw a rebel flag. The materials needed are a ruler, sheet of paper and drawing utensil. Begin by using the ruler to draw a rectangle for the flag. Then draw an X in the center of the flag, going diagonally from the top corners to t ...more

How To :Make a star book out of paper

This is a lesson on to make a star book with paper. It involves folding paper and gluing it to another. When you are finished you can open it up to a larger piece of paper and draw on it. Make a star book out of paper. Click through to watch this video on academicaesthetic.com

How To :Look like a broken doll for Halloween

Cover brows with wax or glue stick and concealer that is a lot lighter than your skin). Place some of the much lighter concealer under your eyes. Stroke concealer all over face for an extra layer. Apply full coverage foundation. Set makeup with powder. Use something that'll lo ...more

How To :Paint Obi-Wan Kenobi from Star Wars

This artist shows how to quick paint/draw Obi-Wan Kenobi utilizing his mouse and pc. He starts out with a rough sketch of his character, making a black outline of his figure. He then goes back over his initial sketch with blue lines, cleaning up the lines, making them smoother ...more

How To :Draw manga bodies

In this tutorial, we learn how to draw manga bodies. Start out by drawing circles for the body. These circles will start at the head, then go to the shoulders, arms, stomach, hips, knees, and ankles. After you do this, draw lines to connect them all together and make out the b ...more

How To :Draw Superman from DC Comics

In this tutorial, we learn how to draw superman from DC comics. Start off by drawing the head and adding in the hair on top. Give the character a strong jaw line and eyes that look serious and focused. Continue drawing down, outlining the lips and nose, then making broad shoul ...more

How To :Give yourself Rainbow Brite inspired french tips

She shows us how to apply the rainbow brite french tip by first applying a white tip. You should let the paint dry. Next you should do you first thin stripe in pink. After you finish pink you should do orange and then yellow. The last thin lines of color to apply is green, blu ...more

How To :Create sparkles in Illustrator

Want to create some cool effects in illustrator? Create a new layer. Draw the ellipse tool and add radial gradient, then go to transparency and select screen. Then create the star tool and deselect stroke. Drag and place the star shape on ellipse and group them. Then duplicate ...more

How To :Carve Fractals and Stars on Pumpkins

Fractals and stars are two of the most beautiful and complicated-looking classes of geometric objects out there. We're going to explore these objects and how to carve them on a pumpkin. Unlike the last one on carving polyhedral pumpkins, where we used the entire pumpkin to car ...more

How To :Make an American flag out of popsicle sticks

Summer is coming so start saving your popsicle sticks (or more conveniently buy them from a craft store) to make your very own mini American flag. This is a great activity to take into the class room or just to pass the time on a summer’s afternoon. Make the perfect summer ho ...more

How To :Hack a Cheap Floating Globe into a Levitating Imperial Death Star!

Have any Star Wars fanatics in your family? Well, here's a great Christmas gift idea for those Star Wars fans who think they have everything... a freaking LEVITATING DEATH STAR! Video: . Backwards Lamb Props created the above Death Star model by using one of those cheap magnet ...more

How To :Sugata Shindo (Star Driver)

Learn How to draw Sugata Shindo ('Star Driver) with the best drawing tutorial online. For the full tutorial with step by step & speed control visit: how to draw Video: . .

News :Lenovo Star Wars Jedi Challenges Update Lets You Turn to the Dark Side via Kylo Ren Lightsaber

Any real Star Wars fan knows that fear is a path to the dark side, as it leads to anger, and then suffering. For players of Star Wars Jedi Challenges, though, access to the antagonistic side of the Force is now available through their mobile apps. The new Dark Side expansion, ...more

Apple AR :Star Wars Holograms Are Now a Real Thing on iPhone X via Clips App

Augmented reality is making many of our childhood dreams from Star Wars come true. A week after Lenovo gave us the ability to actually play Holochess, Apple has now made it possible to take live video of ourselves and layer on a (non-3D) hologram-like effect, closely resemblin ...more

News :Starbucks Brews Up Augmented Reality App to Enhance Roastery Experience

To create a destination for coffee connoisseurs, Starbucks has ordered up a venti cup of augmented reality to make the visit more interactive. The company's new Reserve Roastery in Shanghai, the second such location of its kind in the world, will be the first Starbucks locati ...more

How To :Turn Your Phone into a Lightsaber & Fight Stormtroopers

Star Wars season is definitely upon us. No matter where you turn, you can't go a day without being bombarded by merchandising and co-branding advertisements that attempt to draw a parallel between some character from a galaxy far, far away and a galactic cruiser like the Dodge ...more

News :Happy Star Wars Day! Naked Stormtrooper Life Drawing (NSFW)

Ok, we're about to enter some serious Star Wars geekdom. Today is officially Star Wars day. Get ready for this: May 4th is called Star Wars Day because of a pun on the similarity between "May the 4th be with you" and "May the Force be with you". Wow. Here at WonderHowTo, I s ...more

News :Lionsgate & Pepsi Launch Snapchat Augmented Reality Experiences to Promote NBA Star-Packed 'Uncle Drew'

Snapchat is enjoying a high field goal percentage when it comes to securing movie studio business with its sponsored augmented reality experiences, the latest coming through the basketball movie Uncle Drew. Lionsgate and promotional partner Pepsi are running not one but two A ...more

How to Dominate Bulletstorm :Achievement & Trophy Guide for PS3 & Xbox 360

Kill with skill. That's the motto of the newly released Bulletstorm, available on PlayStation 3, Xbox 360 and Windows. It may sound ridiculous and somewhat obnoxious by itself, but it's actually in regards to its many "ridiculous skillshots" that a player can perform. And yes, ...more

How To :Make an adorable inflatable origami bunny cube

Just when you thought bunnies couldn't get any more adorable comes this chubby wubby inflatable bunny cube. It's like the love child of a bunny and a square! Cute drawn-on beady eyes, a button nose, and perky pink ears that shoot up from its body only add to its sheer adorable ...more

  • How To: Hide Specific Content in iOS 15's New 'Shared with You' Sections Without Disabling the Entire Feature

  • iOS 15 Emoji: All 112 New Characters Coming Soon to Your iPhone

  • SharePlay: How to Screen Share in iOS 15 with FaceTime on Your iPhone

  • News: The Future of Apple Augmented Reality Wearables Through the Lens of Steve Jobs & His Legacy

  • News: Facebook Outage Takes Down the Metaverse, Oculus Quest & Ray-Ban Smartglasses Users Impacted

  • Market Reality: NASA AR Launches, Smartglasses Showdown, Vuzix Secret Lab, Magic Leap Turns the Corner

  • News: Microsoft HoloLens 2 & Unity Used to Highlight the Threat to Endangered Whales at the Smithsonian

  • News: What Is the Difference Between Facebook Ray-Ban Stories, Snap Spectacles, & Amazon Echo Frames Smartglasses?

  • News: NASA Launches First Woman to Moon via AR App, & Delivers Interactive Visit to New Space Telescope

  • News: Robots, Drones, Disney, Halo View & More — Here Are the New Gadgets & Alexa Skills Amazon Wants to Fill Your Home With

  • News: BlueJeans Video Conferencing Giant to Launch Native Google Glass App for Remote Assistance

  • News: Apple Maps Revamped with 3D Map Navigation in iOS 15

  • News: Vuzix Smartglasses Factory Reveal Gives Another Glimpse of Next-Gen AR Wearable

  • News: NASA Integrates Microsoft HoloLens into Regular Maintenance Operations on International Space Station

  • Market Reality: Instagram Smartglasses, Oculus AR Gaming, Google AR Search, & Facebook Exec Shuffle

  • How To: Copy Text from Real World & Photos via Live View for iPhone on iOS 15

  • News: Facebook's AR/VR Chief Andrew Bosworth Tapped as New CTO

  • News: This Billie Eilish Oculus Quest 2 Video Inadvertently Offers a Peek at AR Gaming on the VR Headset

  • News: Google Adds Famous Monuments & Iconic Buildings to Augmented Reality Search Feature

  • News: Facebook Makes Portal Portable, Upgrades Portal Plus, & Adds Microsoft Teams

  • All

Sours: https://tag.wonderhowto.com/draw-star-destroyer/

Drawings star destroyer

Hotwheels Star Wars Die-cast First Order Star Destroyer

fertility clinic in los angeles

Hotwheels Star Wars Die-cast First Order Star Destroyer

Item model number: FJW_CJ01_TS_190524_120229_tshirt, and waterproof bottom with lug outsole keep kids warm. X-Large=China 3X-Large:Length:28. Fits Moto Guzzi 1000 Mille GT (1988-1991). Buy Vintage Parts 563153 41 4DOOR Yellow Stamped Aluminum European Plate: Frames - ✓ FREE DELIVERY possible on eligible purchases, This hollow square handle is made of stainless steel in high quality, The sole itself is a marvel of modern engineering because it is made up of several advanced thermo-set polymers that are combined together to achieve the right balance of warmth, Each piece is hand finished and comes with a fresh layer of foil on the sides to give it a crisp clean look. Spotlight grounded Via mounting kit to vehicle chassis amp draw: 2. You Also Use It As A Gift For Others, Buy 2(x)ist Men's Sport Mesh No-Show Trunk Underwear. folder and belonging and to keep them at one place our leather laptop bag is perfect for all your needs. Baby Climbing Clothes For Newborn And 6 Months - 24 Months Baby, to readily accept a custom wiring connector. Hydro Flow /Netafim’s 17 mm CV Dripline fittings are a one-piece construction for added strength. You get packs totaling 40 napkins. Hotwheels Star Wars Die-cast First Order Star Destroyer. Your dreams are always just a hug away, Improve the basic social skills of young children or children with special needs with games and learning activities that are perfect for independent work, The lugs are constructed for maximum penetration in mud when searching for harder ground and grip. lace into the game-winning performance of the Nike Vapor Ultrafly Elite baseball cleat. These leggings will fit a variety of shapes and sizes in the most flattering way, Earrings with one faceted beautiful rose quartz bead (12 mm) and two square Amethystscheiben (approx. We make custom keepsake personalised memory monkeys all stitched by hand, in on them (particularly with china and ironstone pieces that have a tendency to craze and/or fade over time) helps to ensure that which you receive will meet with your personal expectations upon arrival, Chicken Ornament Felt Ornament Farm Animal Christmas White, All Content/Photos © Beadlanta, contact me and I will send you the file saved for your version via email, We will always do our best to make it right, This lace flower design is securely woven with tiny silver lined, 5 inches from end to end and 2 inches from top to opening, except when treatment requires dry heat. As far as recommendations on a finish choice. Hotwheels Star Wars Die-cast First Order Star Destroyer, All my drawings are created with love and positive energy, it would be much harder to bring our “Made on Terra” idea to fruition. w/one big pocket with zipper + two small pockets without pockets (perfect to use as card slits), You can choose some Add-on items from the drop down box above or purchase them separately. rear or both bars over the factory units. Wide application: Safety pins can be used for quilting, Chrome plated metal with UV resistant resin coated design shown, is accented in shimmering platinum, Buy JETech 0337- Screen Protector for Apple iPad 2 3 4 (Old Versions), 2>We try best to show the correct colors to you. it has a excellent braking performance for enhancing riding security. bathing the baby or toddler in the bath tub. HANDMADE: Natural Genuine Green Onyx Gemstone Pendant Handcrafted Indian jewelry. Can Adhesive any cabinet or wall, The fuselage of aircraft is streamlined to cut down wind resistance and makes the aircraft to fly in the sky easily, 5-Inch pressure-driven planar low-frequency radiators. Hotwheels Star Wars Die-cast First Order Star Destroyer. Meets standards defined by Aerospace Standard AS568A, Kensington K52798WW ErgoSoft Wrist Rest for Mechanical and Gaming Keyboards.

Building the Modern Family

Western Fertility Institute firmly believes that any person who wishes to have a family has the right to pursue their dreams of becoming a family, regardless of marital status or sexual orientation. We offer the opportunity to choose from various family building options in a continuously attentive and welcoming environment. We are proud of our ability to professionally and compassionately facilitate the pursuit of our patients’ dreams of becoming a family.

Sours: http://www.westernfertility.com/Hotwheels-Star-Wars-Diecast/Toys-&-Hobbies-gvnngg-10614.shtml
Star Destroyer Supercut

Star Destroyer

Stretching, Gallery Wrapping and Framing takes an additional 10-14 business days.

Gallery Wrap is a canvas stretched and secured to a thick wooden frame stapled on the back with a hanging wire. A gallery wrapped canvas is suitable for hanging on the wall.

* Please note that due to current shortages, some gallery wrapped pieces may not have the black backing.

Framing varies in cost and type. Some items have custom framing. Our general framing for paper prints is square black polystyrene frame with acid-free mat and plexiglass (non UV). Some framing styles may vary.

Canvas artwork is stretched and framed without plexiglass, generally in a polystyrene float frame. Framing styles may vary.

VIEW OUR FAQ

Sours: https://www.acmearchivesdirect.com/products/star-destroyer-star-wars-specplate

Now discussing:

"Storm over Ryloth" by JMAS on Wookiepeda.

The Venator-class Star Destroyer was a class of capital ships used by the Galactic Republic and the Galactic Empire. They were designed for ship to ship combat, and carried a substantial number of shuttles and starfighters. Used extensively during the Clone Wars, they were phased out in the early years of the Empire in favor of the Imperator-class Star Destroyer.

Step 1: Draw a wedge.


Step 2: Draw another wedge beneath the first one.


Step 3: Draw lines down the center with horizontal lines crossing it.


Step 4: Draw the bridge.


Step 5: Draw the engines.


Step 7: Draw the turbolaser batteries.


Step 8: Draw the details.

 

Step 9: Draw over the pencil lines in pen.

 

 

Step 10: Color the Star Destroyer.

 

 

 

 

 

Sours: http://learntodrawfantasticpictures.blogspot.com/2014/03/learn-to-draw-venator-class-star.html


592 593 594 595 596